GC-2014

Universal chromatograph for working with capillary and packed columns

The Shimadzu GC-2014 gas chromatograph is designed to work with both capillary and packed cells.

Features

Top-level performance. Digital control using the AFC flow controller is performed not only for capillary but also for packed columns. This control of the carrier gas flow provides a higher level of reproducibility of retention times and peak areas.

Possibility of simultaneous installation of three injectors and four detectors. You can choose any of four types of injectors and five types of detectors, depending on the components and analysis objects to be determined. Additional injectors, detectors and autodosers can be easily installed on the chromatograph already in your laboratory.

Injectors

  • DINJ-2014. Dual injector for push-in columns. The injector for two gas streams is controlled by a single temperature controller.
  • SPL-2014. Split/Splitless injector. Designed for high-speed analysis with capillary columns. The carrier gas saving function allows you to reduce the total carrier gas consumption during the analysis. The standard configuration allows you to perform sample injection under high pressure.
  • SINJ-2014. Single injector for push-on columns.
  • WBI-2014. Injector for wide capillary columns. Sample introduction without flow splitting. Has septum blowing function. For analysis without flow splitting, a special glass insert is required.

Detectors

  • FID-2014. Flame ionization detector. It is possible to install both single and double FID on the chromatograph.
  • TCD-2014. Thermal conductivity detector. TCD-2014 is a universal detector, with its help you can analyze inorganic and organic compounds.
  • ECD-2014. Electron capture detector. Used for the analysis of electrophilic compounds.
  • FPD-2014. Flame photometric detector. The new FPD-2014 is compact, allows operation at high temperatures (up to 350°C). Easy replacement of interference filters is provided, without the use of additional tools. The FPD is selective and highly sensitive to phosphorus- and sulfur-containing compounds.
  • FTD-2014 і FTD-2014C. Flame thermionic detectors, for packed columns and capillary columns respectively. Used for the analysis of trace amounts of nitrogen- and phosphorus-containing compounds.