ТMA-60/60H

• High analysis accuracy and wide dynamic range are significantly increased by the high-precision digital displacement sensor. At the same time, a wide measurement range of ± 5 mm is possible (twice as much as in the previous model), which ensures accurate determination of both small and large deformations of the sample.
• A variety of programs makes it possible to subject the sample (films, fibers, etc.) to various static and dynamic influences with a constant rate of loading or elongation, and to operate in cyclic mode.
• The use of a bayonet connection in the design of the sample holder and a built-in temperature sensor ensure ease of operation (repair if necessary) and increase the speed of changing measurement modes (tension, expansion, penetration).
• A built-in safety mechanism prevents the sample from sticking to the sensor. If the displacement exceeds the specified range, for example, due to melting of the sample, the measurement is immediately stopped and the load is removed from the sample.
• Accurate automatic determination of the sample length by direct measurement with a high-precision digital displacement sensor (the measurement is more accurate compared to other methods in which the calculation is based on the distance of the motor movement).
• The devices are equipped with a cooling fan that automatically cools the oven after the measurement is completed.

The station provides the ability to simultaneously connect and control up to 4 devices (DTG, DSC, TMA, TGA, DTA) with simultaneous data processing. The TA-60WS software has an intuitive interface and allows you to perform all the operations necessary for collecting and processing measurement results, creating reports.

Used with TMA-60 analyzers, provides measurements in the temperature range from -150 to 600 ° C. When operating below room temperature, liquid nitrogen is used.